Introduction

White marble is sought after for its grace and brightness and for the luxurious feeling it brings, particularly in high-end homes and commercial spaces. Vietnam pure white marble is the one of most friendly material that you can choose among many other materials. But like any natural stone, it has its challenges if you’re not choosing, installing and maintaining it the right way. Knowing these typical issues ahead of time allows homeowners, architects and builders to achieve lasting beauty and performance.

Yellowing Problem As Time Goes By

One of the most common complaints about white marble is that it turns yellow after just a few years. This is typically not a problem with the marble but a result of the wrong installation products being used. Dyes from organic substances, such as beverages, food, rainwater and (low quality) cement, moisture under the slab or chemical reaction of the adhesives can cause staining.

White cement, the right type of adhesive, and vapor barriers need to be used to install it, to prevent this. Making sure the base is dry when installing the marble can greatly prevent yellow spots from forming later on.

Stained by Water, Soap and Chemical

Water, soaps, oils and cleaning products in bathrooms, kitchens and busy spaces often come into contact with marble. if the surface is not sealed properly, these substances can penetrate the stone and may result in stains, that are very difficult to remove.

When you deal with a professional vietnam white marble supplier in india, you can be assured of they will pre-treat the marble slabs and recommend the appropriate sealants before you install. Occasional resealing, combined with cleanings using only pH neutral solutions, can keep it looking like new.

Korisan and dull in surface property

Marble is hard but even so it is a relatively soft natural stone when compared to granite. Fine scratches can be caused by pulling on a rough surface of heavy objects, abrasive cleaning tools and dust particles. This will create a dull surface that will not shine over time.

This is prevented by cleaning regularly with a soft cloth and not using abrasive cleaning tools. Professional repolishing at five years or so will remove the light surface scratches and will bring the block back to its original gloss.

Hazzards Resulting From Mean Defects in Handling and Installation

The manufacture of large marble slabs mandates meticulous handling at all stages of transportation and installation. Uneven bed surfaces, wrong lifting, or wrong thickness choice can cause cracks even as early as the installation.

Advice from a well-known vietnam white marble supplier can be sought in choosing the appropriate thickness of slab pertaining to application area. The base must also be suitably leveled, and the installation so competent as to not induce stress cracks.

Difference in shade and texture

There is always an expectation for a completely uniform when the white marble buyers are looking to buy. But subtle shade and texture differences that are inherent to natural stone are to be expected. Complications come in when slabs from different batches are mixed, without selection, and the result are noticeable stark differences on floors or walls. This can be prevented by taking all slabs from the same batch and by dry laying the slabs before making the final installation to verify if you have a visual consistency throughout the surface.